Login or Register for FREE!
Login or Register for FREE!
Subel. A
6 questions
Subelement A

VHF-DSC Equipment & Operation:

Section 2

Controls and Functions:

What is the purpose of the USA-INT switch?

  • To provide for simplex operations with European Public Correspondence stations.
  • To provide for duplex operations with U.S. Public Correspondence stations.
  • To change from duplex to simplex operation on designated channels in European waters.
  • Correct Answer
    To change from duplex to simplex operation on designated channels in U.S. waters.
This question does not yet have an explanation! Register to add one

Tags: none

What may happen if the USA-INT control is left on INT when in U.S. waters?

  • Correct Answer
    Your signals will be heard but other station replies will not be heard on certain channels.
  • You will be able to communicate with public correspondence stations on Channel 5.
  • Other stations will not be able to hear your transmissions and you will not hear any signals.
  • You will not be able to operate on channel 13.
This question does not yet have an explanation! Register to add one

Tags: none

What is the purpose of the Dual Watch function?

  • Allows simultaneous reception on two different channels.
  • Correct Answer
    To rapidly switch the radio's receiver between two channels.
  • Allows reception and transmission at the same time.
  • It allows you to monitor both sides of a public correspondence station's communication.
This question does not yet have an explanation! Register to add one

Tags: none

What is the proper adjustment of the squelch control for maximum sensitivity?

  • Maximum clockwise rotation.
  • Maximum counterclockwise rotation.
  • Correct Answer
    Just below the point where the noise breaks through.
  • The squelch has no effect on the sensitivity.
This question does not yet have an explanation! Register to add one

Tags: none

Which of the following transmitter power levels are permitted by FCC rules?

  • Low Power: 0.1 W, High Power: 5 W
  • Low Power: 0.5 W, High Power: 25 W
  • Correct Answer
    Low Power: 1 W, High Power: 25 W
  • Low Power: 5 W, High Power: 50 W
This question does not yet have an explanation! Register to add one

Tags: none

Which of the following controls is not found on a VHF-DSC transceiver?

  • "Distress"
  • "Cancel"
  • "Squelch"
  • Correct Answer
    "R.I.T."
This question does not yet have an explanation! Register to add one

Tags: none

Go to 1 Go to 3
HamStudy.org™ is copyright 2024 Signal Stuff™, All rights reserved.
View Privacy Policy    |    Get help with HamStudy.org™