Login or Register for FREE!
Login or Register for FREE!
Subel. F
6 questions
Subelement F
Other Equipment and Networks:
Section 44
Local Area Networks- NMEA-2000:
The Voltage of the NMEA 2000 backbone power supply pair must be maintained to within the following range.
  • 0 to 5 volts
  • Correct Answer
    9 to 16 volts
  • 10.5 to 13.6 volts
  • 12 to 24 volts
This question does not yet have an explanation! Register to add one

Tags: none

NMEA 2000 Certified Device identify their current requirements in terms of LENs (load Equivalent Number). 1 LEN is equal to:
  • 1 Amp
  • 500 mA
  • Correct Answer
    50 mA
  • 25 mA
This question does not yet have an explanation! Register to add one

Tags: none

Which of the following are NOT components of a NMEA 2000 network?
  • Tees, Drop Cables and terminating Resistors.
  • Tees, Backbone Cables, Power Cables.
  • Termination Resistors, Power Cables, Backbone Cables.
  • Correct Answer
    Multiplexers, Combiners, Routers.
This question does not yet have an explanation! Register to add one

Tags: none

The NMEA 2000 backbone operating speed is:
  • Correct Answer
    250 bps
  • 500 bps
  • 1500 bps
  • 2000 bps
This question does not yet have an explanation! Register to add one

Tags: none

When viewing NMEA 2000 data you must use the following.
  • Voltmeter
  • Converter
  • HyperTerminal
  • Correct Answer
    Gateway
This question does not yet have an explanation! Register to add one

Tags: none

What is the maximum length for a drop cable to a single NMEA 2000 device?
  • Correct Answer
    6 meters
  • 12 meters
  • 18 meters
  • 24 meters
This question does not yet have an explanation! Register to add one

Tags: none

Go to 43 Go to 45
HamStudy.org™ is copyright 2024 Signal Stuff™, All rights reserved.
View Privacy Policy    |    Get help with HamStudy.org™