The distance a radio wave travels during one complete cycle can be thought of as the length of the wave, or the wavelength. Imagine that you can see the complete path as a line, such as you might see on an oscilloscope; the length from the top of one "wave" to the top of the "next" is the wavelength.
Last edited by camplate. Register to edit
Tags: definitions radio waves ugly_person arrl chapter 2 arrl module 2
There's always an electric and magnetic field to a radio wave, and they're oriented 90 degrees to each other. You could use either magnetic or electric to define polarization, but it's conventional to use the electric field (not the magnetic field, or a ratio).
Polarization has nothing to do with the velocity of a radio wave, hence the ratio of velocity to wavelength has nothing to do with polarization.
Last edited by liamwright50. Register to edit
Tags: arrl chapter 4 arrl module 8
Radio waves are also sometimes referred to as electromagnetic waves because they are made up of both electric and magnetic fields.
For this reason a capacitor (which stores energy in an electric field) and an inductor (which stores energy in a magnetic field) can both be used to help tune an antenna. Some antennas incorporate one or both as part of the design and antenna tuners utilize variable capacitors and inductors to function.
AC and DC are different types of current and have little or nothing to do with radio waves; Voltage and current are components of power and may be used to produce radio waves but do not comprise them.
Ionizing and non-ionizing radiation is probably the most confusing distractor but don't fall for it - that's not it either =]
Last edited by mlev. Register to edit
Tags: definitions radio waves arrl chapter 4 arrl module 8
All electric, magnetic, and electromagnetic waves travel at the same speed. This includes light waves, radio waves, electrical waves, and magnetic waves.
Sound waves are a different story.
Just remember that radio waves and light waves are actually not all that different when it comes down to it; they're just a different frequency. They travel at the same speed.
Last edited by kd7bbc. Register to edit
Tags: radio waves arrl chapter 2 arrl module 2
Think about how you would graph a wave (radio waves are graphed as sine waves). The distance left to right represents time, and the distance from one peak of the wave to the next is the wavelength and each time you reach the peak again is one cycle. The frequency is the number of cycles per second; thus, if you have more cycles in the same distance (higher frequency), the distance between peaks (wavelength) will be shorter.
Last edited by fsemcnzowa!yzmmovri4ibewioi=. Register to edit
Tags: radio waves frequencies arrl chapter 2 arrl module 2
Wavelength in meters equals 300 divided by frequency in megahertz.
\begin{align} \lambda _\text{ (meters)} = \frac{300}{f_\text{ (MHz)}} \end{align}
Knowing this will help you with quite a few of the problems in the Technician class question pool!
For example, if you see the frequency \(150\text{ MHz}\) and need to know what band it is in, divide the speed of light by the frequency. MHz cancels out, which leaves you with \(\frac{300}{150\text{ MHz}} = 2\text{ meters}\)!
The \(150\text{ MHz}\) frequency is exactly in the middle of the 2-meter band. If your number is not quite on (e.g. \(\frac{300}{144\text{ MHz}} = 2.08\text{ meters}\)) that's okay, because the bands have a little play both above and below the "wavelength" number.
Ever wonder where the value \(300\) comes from?
Here's the general form of the equation above:
\[\lambda \times f = c\]
The units are all basic SI units (International System of Units or Metric System) -- let's add them for clarity:
\[\lambda_\text{ (meters)} \times f_\text{ (Hz)} = c_\text{ (meters per second)}\]
The speed of light \(c\) is a constant, so we can plug that value in: \begin{align} \lambda_\text{ (meters)} \times f_\text{ (Hz)} &= 3.00 \times 10^8\text{ m/s} \end{align}
There are \(10^6\text{ Hz}\) in each \(\text{MHz}\), so let's divide both sides by \(10^6\) and simplify: \begin{align} \frac{\lambda_\text{ (meters)} \times f_\text{ (Hz)}}{10^6} &= \frac{3.00 \times 10^8\text{ m/s}}{10^6}\\ \lambda_\text{ (meters)} \times \frac{f_\text{ (Hz)}}{10^6} &= 3.00 \times 10^2\text{ Mm/s}\\ \lambda_\text{ (meters)} \times f_\text{ (MHz)} &= 300 \text{ Mm/s}\\ \lambda_\text{ (meters)} &= \frac{ 300 \text{ Mm/s} }{ f_\text{ (MHz)}}\\ \end{align}
Easy memory tip - The number "300" appears in the middle of the correct answer.
Last edited by jgh633. Register to edit
Tags: math radio waves frequencies formulas arrl chapter 2 arrl module 2
This is a common part of Ham vocabulary. You'll hear something like: "I was talking on the 2-meter band last night..", which actually means they were talking somewhere between 144Mhz and 148Mhz (the authorized frequencies with a 2-meter wavelength). Other common terms are 33cm (the 902Mhz band), 70cm (the 440Mhz band), etc. Each frequency range has a corresponding wave-length that hams will refer to.
Last edited by glitteribbon. Register to edit
Tags: radio waves frequencies arrl chapter 2 arrl module 2
One thing that often confuses new hams is that the terms "HF", "VHF', and "UHF" actually refer to different parts of the spectrum, with "HF" or "High Frequency" actually referring to frequencies that are the lowest commonly used by Amateur Radio Operators.
The range are thus:
Last edited by rjstone. Register to edit
Tags: frequencies memorizing vhf arrl chapter 2 arrl module 2
One thing that often confuses new hams is that the terms "HF," "VHF," and "UHF" actually refer to different parts of the spectrum, with "HF" or "High Frequency" actually referring to frequencies that are the lowest commonly used by Amateur Radio Operators.
The ranges are thus:
Last edited by frozenfoxx638. Register to edit
Tags: frequencies memorizing uhf arrl chapter 2 arrl module 2
One thing that often confuses new hams is that the terms "HF," "VHF," and "UHF" actually refer to different parts of the spectrum, with "HF" or "High Frequency" actually referring to frequencies that are the lowest commonly used by Amateur Radio Operators. In other words, HF frequencies may be "high frequency", but they are lower frequency than "very high frequency" and "ultra high frequency".
300 to 3000 KHz are very rarely used by hams, but that would be the "Medium Frequency" or MF band.
The ranges are thus:
Last edited by vaughndeastman. Register to edit
Tags: frequencies memorizing hf arrl chapter 2 arrl module 2
This is a useful number to know; it is, of course, the speed of light or approximately
\begin{align} 3\times10^8 \text{m/sec} = 300,000,000\text{ m/sec} \end{align}
One really useful thing about this number is that it comes out to the same range as "Mega" (6 zeros after 300), so it can be used as a quick way to calculate wavelength in MegaHz (MHz).
For example, if you see the frequency \(150\text{ MHz}\) and need to know what band it is in, divide the speed of light by the frequency. MHz cancels out, which leaves you with \(\frac{300}{150\text{ MHz}} = 2\text{ meters}\)!
The \(150\text{ MHz}\) frequency is exactly in the middle of the 2-meter band. If your number is not quite on (e.g. \(\frac{300}{144\text{ MHz}} = 2.08\text{ meters}\)) that's okay, because the bands have a little play both above and below the "wavelength" number.
Last edited by rjstone. Register to edit
Tags: radio waves memorizing arrl chapter 2 arrl module 2