Login or Register for FREE!
Login or Register for FREE!
Subel. J
6 questions
Element 7 (Valid until Apr 6, 2022)
Subelement J

MF-HF Equip. and Comms:

Section 92

MF-HF ARQ Operation-Technical Characteristics:

Which of the following statements concerning SITOR (NBDP) communications is true?

  • In ARQ, each character is transmitted twice, about 250 milliseconds apart.
  • Correct Answer
    In ARQ, the "information sending station" will transmit a block of three characters that the receiving station will subsequently acknowledge or request be retransmitted.
  • In ARQ, the "information sending station" transmits a block of three characters twice, about 250 milliseconds apart.
  • SITOR (NBDP) communications can be used to contact a NAVTEX transmitting station when requesting a repeat transmission of a missed NAVTEX message.
This question does not yet have an explanation! Register to add one

Tags: none

What statement is true regarding the exchange between two parties engaged in SITOR (NBDP) communications?

  • In ARQ, each character is transmitted twice, with the second displaced in time from the first.
  • In ARQ, the "sending" station transmits a block of three characters and the "receiving" station responds with a one character Repeat Request. Following this the "transmitting" station will send a new block.
  • Correct Answer
    In ARQ, the ISS transmits a block of 3 characters and the IRS checks for parity. If the received block is correct a one-character control signal is sent notifying the ISS to proceed with the next block. If the parity check fails the block must be resent.
  • Broadcasts of Maritime Safety Information, traffic lists, etc. can be copied by the receiving station in ARQ mode.
This question does not yet have an explanation! Register to add one

Tags: none

Of the following, which is true of SITOR (NBDP) ARQ mode?

  • The acceptance code consists of three characters.
  • A continuous data stream is transmitted.
  • Forward error correction reduces the number of errors.
  • Correct Answer
    Each data block consists of three characters.
This question does not yet have an explanation! Register to add one

Tags: none

Which of the following is true of SITOR (NBDP) ARQ mode?

  • Correct Answer
    This is an interactive mode.
  • Each character is repeated three times.
  • Each character is transmitted twice.
  • This mode is generally used to broadcast messages.
This question does not yet have an explanation! Register to add one

Tags: none

In ARQ, when the information sending station (ISS) receives a signal that the parity check failed what happens?

  • The next block will be sent.
  • The data link will break.
  • The acknowledge light should illuminate.
  • Correct Answer
    The last block will be resent.
This question does not yet have an explanation! Register to add one

Tags: none

Which of the following is true of SITOR (NBDP) ARQ mode:

  • Correct Answer
    The ship station sends a group of 3 characters, the shore station checks for proper parity. If parity is OK, the shore station indicates readiness for transmission of the next 3 characters.
  • The ship station sends a group of 3 characters twice and then waits for an "RQ" signal to indicate proper receipt before continuing transmission.
  • The Ship station sends each character twice, using a time diversity system to ensure proper parity.
  • The ship station sends a group of 3 characters, the shore station checks for proper parity and then requests the same group be resent to enable error correction.
This question does not yet have an explanation! Register to add one

Tags: none

Go to 91 Go to 93
HamStudy.org™ is copyright 2024 Signal Stuff™, All rights reserved.
View Privacy Policy    |    Get help with HamStudy.org™