One way to send a CW or data transmission is to use full break-in telegraphy (QSK). The abbreviation QSK is used as Q code for "Can you hear me between your signals?" or "I can hear you between my signals." Using this method allows the transmitting stations to receive returning signals between code characters and elements. This is useful for the receiving station to be able to "break-in" during a long transmission and ask about a mis-spelled word or other issue with your transmission.

Hint: You have to read BETWEEN the lines.

Last edited by mpainter1986. Register to edit

Tags: Q signals morse code

The Q signal "QRS" is a code for "Send more slowly". If terminated with a question mark, it is the question should I send more slowly?.

A few mnemonics:

• Reduce Speed
• Really Slowly
• Reluctant Snail
• Right Sluggish
• Ralentissez S'il vous plaît (French for "please slow down")

The question mark in the problem statement is an FCC typo, it should be outside the quotes. All choices are ways to respond to a non-question Q code.

Last edited by nicenjehr. Register to edit

Tags: morse code Q signals

CW operators use a multitude of abbreviations or proceedural signals called prosigns to help shorten their communications, as every character must be keyed in. The abbreviation or CW prosign "KN" placed at the end of a transmission means that the transmitting operator is listening for only a specific station or stations.

Note: One easy way to think of this code is that someone using "KN" is looking for a station that they KNow, not just anyone.

You "KN"ow the house/station you are "KN"ocking on.

For more info see Wikipedia: Prosigns for Morse Code

Last edited by hauckrealty. Register to edit

Tags: morse code operating procedures

(D). CW operators often use abbreviations or signal codes called prosigns. They use these character combinations to shorten the phrases that must be keyed in. The code "CL" used at the end of a transmission means that the CW operator is closing their station.

Note: Just remember that "CL" stands for the first letters in "CLose."

For more info see Wikipedia: Prosigns for Morse Code

Last edited by N8GCU. Register to edit

Tags: morse code operating procedures

(B). CW is a great means of communicating on the amateur airways, but it does require practice and experience to key in the proper codes at higher speeds and decode the messages that are received. Amateurs should always practice courtesy in their communications. Receiving a "CQ" that is sent at a slow key rate is a good indicator that the other operator may not be as experienced with keying/decoding. For this reason it is always best to match your keying speed with the speed at which the CQ was sent. Then both parties may enjoy the transmission without pressure.

Last edited by N8GCU. Register to edit

Tags: operating procedures morse code best practices

(D). When operating in CW mode, it is best to match up your transmit frequency to the frequency of the received signal. This is called "zero beating" the signal. It means that both stations are using the same frequency/wavelength and not competing nearby wave forms. This allows for the best clarity of signal transmission and reception between the two stations.

Last edited by N8GCU. Register to edit

Tags: definitions morse code

(A). The RST report refers to the Readability, Signal Strength, and Tone qualities of a given transmission. Giving the other station an RST report can be very helpful, as it lets them know that either their signal is coming through 599 (perfectly readable, Extremely strong signal, pure tone) or that at lower numbers, such as 353C, that they may have a problem with their transmission. The suffix code "C" when added to the RST report means that the signal received is Chirpy or unstable.

Note: Remember that the RST report is about signal quality, and that "C" stands for "Chirpy"

For more info see Wikipedia: RST Code

Last edited by trainer steve. Register to edit

Tags: morse code operating procedures

Prosigns (procedural signs) are common abbreviations that help send shorter, more efficient transmissions.

The prosign AR indicates the end of a formal message. It can also mean "new page" or "new message". According to wikipedia the use of the AR prosign is superfluous in informal Morse conversations. (in other words, unnecessary / extra beyond what is needed).

This is a bit of a trick question, because the distractors are all used in informal Morse conversations as turnover indicators ending a transmission (BK: back to you, KN: over to you, SK: end of contact).

This question is asking about formal messages, not informal conversations.

Mnemonics:

• Acknowledging Receipt
• Await Receipt
• All is Received
• Au Revoir - "see you later" in French

Last edited by nicenjehr. Register to edit

Tags: morse code operating procedures

Q codes are a system of standard abbreviations for use in CW and other communications. They're used for common statements/questions involving CQ operation or transmissions.

Be careful to avoid the distractors that are confusing the Q signal QSL ("I acknowledge receipt") with the idea of QSL cards, which are postcards that amateur operators often use to confirm a contact.

Mnemonics:

• Si, lo tengo, Spanish for "yes, I got it".
• The first and last letters in successful, as in "your communication was successful".
• The L stands for *L**oud and clear.
• Signal Lucid

Last edited by nicenjehr. Register to edit

Tags: morse code Q signals

(B). Q codes are used in CW communications to express common statements or questions more effeciently. If you receive the Q signal "QRQ" from the other station, it means that they want you to send the signal faster, or key more Q uickly. As an opposite signal, "QRS" means to "send more Slowly."

Note: Just think that the last "Q" in "QRQ" stands for /Q/uick.

For more info see Wikipedia: Q Codes

Last edited by captn. Register to edit

Tags: Q signals morse code

The Q code QRV is a shorthand that CW operators use to indicate that they're ready to receive messages.

Mnemonics:

• Notice that phonetically the first and last sounds in Ready to receiVe are RV.
• Ready for Vibes
• Receiving Vibes

"Relax," said the night man
"We are programmed to receive
You can check out any time you like
But you can never leave"

Last edited by nicenjehr. Register to edit

Tags: morse code Q signals