(D). The linear voltage regulator is an example of an analog integrated circuit. The regulator works over a continuous range of voltages and currents to vary the current through the transistor to keep the output voltage linear (constant).

For more info see Wikipedia: Linear voltage regulator

Last edited by jodyfranklin. Register to edit

Tags: none

MMIC is the abbreviation for Monolithic Microwave Integrated Circuit.

This circuit is used for amplification, mixing, or switching in circuits operating at microwave frequencies (300 MHz to 300 GHz).

Hint: The actual name almost seems one of the least likely, but try to remember that the name refers to microwave frequencies.

Hint 2: MM in Latin is two thousand (2,000), a fairly huge number. "Monolithic" means huge.

Silly Hint: When you see the "MM" in MMIC think of saying "mmm" when you smell your food "Microwaved" (Monolithic Microwave Integrated Circuit).

For more info see Wikipedia: Monolithic Microwave Integrated Circuit (MMIC)

Last edited by henrywright978. Register to edit

Tags: none

• CMOS - Complementary Metal Oxide Semiconductor
• TTL - transistor-transistor logic

CMOS circuits use only a very small amount of current when operating. The largest amount of current is used when the circuit is switching between "On" and "Off".

Hint: I think of it as a “Computer Mini Off Switch”, which uses very little power, like turning off the lights consumes less power.

Last edited by edponce@yahoo.com. Register to edit

Tags: none

(B). ROM is the abbreviation for Read Only Memory. This type of storage memory is used for programming steps or data which you want to prevent from being changed. It protects the data or programming from being changed or corrupted while the information is being accessed.

For more info see Wikipedia: Read-only memory

Last edited by heroiclemon. Register to edit

Tags: none

(C). When using non-volatile memory, the stored information is maintained even if power is removed. This is the type of memory used by hard discs, floppy discs, etc. The information is retained even if it is not connected to a power source.

For more info see Wikipedia: Non-volatile memory

Last edited by N8GCU. Register to edit

Tags: none

An integrated circuit operational amplifier operates as an ANALOG device, because it operates over a CONTINUOUS RANGE of voltage and current.

Hint: Analog devices react/operate in a continuous manner, whereas digital devices react/ in steps or increments.

For more info see Wikipedia: Analogue electronics

Last edited by gconklin. Register to edit

Tags: none

(D). Incandescant indicators have the disadvantage of **high power consumption **compared to an LED.

A lot of the energy supplied to an incandescent lamp or indicator is lost in the form of heat (you can burn yourself touching an incandescant bulb). LEDs are becoming much more of a standard because they are much more efficient, while still putting out a bright light.

Last edited by henjcars@gmail.com. Register to edit

Tags: none

An LED is forward biased when emitting light. In other words, the Light Emitting Diode (LED) lights up when the current flows in the forward direction through the diode PN-junction and photons are given off.

Silly Hint: The Light will lead you Forward!

For more info see Wikipedia: Light-emitting diode

Last edited by ironcal67. Register to edit

Tags: none

The liquid crystal display requires ambient or back lighting. This type of display actually works by the thin layer of crystal blocking light transmission when activated rather than emitting light. This is why it requires a source of lighting, so that the areas of blocked light stand out to be read.

For more info see Wikipedia: Liquid crystal display (LCD)

Last edited by ironcal67. Register to edit

Tags: none

(A). The USB (Universal Serial Bus) interface would likely be used to connect a computer and the transceiver in an amateur radio station. This type of cable interface allows for serial data streaming.

For more info see Wikipedia: USB (Universal Serial Bus)

Last edited by N8GCU. Register to edit

Tags: none

(B). The microprocessor is like a mini computer on a single integrated circuit. The microprocessor, as a programmable device, can perform many speciallized operations, modulations, or control functions in an electronic device.

For more info see Wikipedia: Microprocessors

Last edited by N8GCU. Register to edit

Tags: none

The DE-9, or 9-pin D-style connector is commonly used for data serial ports.

The DE-9 is part of the D-subminiature or D-sub group of connectors. This type of connector has a "D" shaped bar with 2 or 3 rows of pins; in the case of the DE-9, it has 9 pins.

This connector is often (mistakenly) referred to as a DB9 connector. The asymmetrical shape and pin arrangement prevents incorrect connections.

For more info see Wikipedia: D-subminiature connectors

Silly hint: "Data" starts with "D"

Last edited by ironcal67. Register to edit

Tags: none

The PL-259 connector is commonly used for RF service at frequencies up to 150 MHz. This is a part of the UHF group of connectors. The PL-259 has a plug with a central male pin and is usually used for connection of coaxial cable.

Hint: 5 is the middle figure in both PL-259 and 150 MHz.

For more info see Wikipedia: PL-259

Last edited by gconklin. Register to edit

Tags: none

The RCA Phono connector is the most commonly used for audio signals in amateur radio stations. Originally manufactured by the RCA company for their audio equipment they are now the standard red, white and yellow plugs used for connecting all types of audio equipment. Sometimes they are referred to as standard composite or component audio/video plugs.

For more info see Wikipedia: RCA connector

Silly hint: “Phono” sounds like phone, which is technology that uses audio.

Last edited by kd7bbc. Register to edit

Tags: none

Keyed connectors mean that the contact arrangements or body shapes are asymmetrical. This ensures that the connection can only be made in one orientation. This is particularly useful where reversing the connections might damage the equipment.

For more info see Wikipedia: Keyed connector

Last edited by glitteribbon. Register to edit

Tags: none

The Type N connector is a moisture-resistant RF connector useful up to 10 GHz.

The Type N is often used for coaxial cable connections, and has a threaded plug similar to a PL-259 but with a moisture-resistant gasket. This type of connector is especially useful for antenna connections not only for its "water-tight" capabilities, but also because it has the same 50-ohm impedance as coaxial cable, and so impedances are matched.

Most manufacturers claim consistent performance up to 11 GHz and many use it up to 18 GHz.

For more info see Wikipedia: Type N connector

Silly hint: “N” for “Nautical”. (Water). Thus, associated with “water-resistant”

Last edited by jeff00seattle. Register to edit

Tags: none

(C). The DIN type connector is a family of multiple circuit connectors suitable for audio and control signals.

DIN stands for the Deutsches Institut fur Normung, the German Standards Organization. These connectors usually are in the form of a circular plug, with an asymmetrical arrangement of pins with an orientation notch on the bottom. This keys the connector to prevent incorrect mating of the pin contacts.

For more info see Wikipedia: DIN and Mini-DIN connectors

Silly Hint: Audio transmission is noise, and DIN is another word for noise.

Last edited by kc7ywx. Register to edit

Tags: none

An SMA connector is A small threaded connector suitable for signals up to several GHz.

SMA is an acronym for a SubMiniature version A.

To eliminate distractors, note that SMA does not stand for serial multiple access. Also, an SMA is a miniature connector—so not a "large bayonet connector". Lastly, this is not a connector that is specialized for high power or high voltage.

This type of connector is usually used for smaller gauge coaxial cable. It is especially useful for handheld transceiver or other antenna connections because the SMA connector has a 50 ohm impedance, matching that of the coaxial cable, allowing for excellent performance.

Silly Hint: SMA is the the first three letters of the word “small.” There is only one choice of answers with the word “small” in it.

For more info, see Wikipedia: SMA (SubMiniature version A Connector)

Last edited by rooster64. Register to edit

Tags: none